Search & Filtering
Write a program that takes the value of positive integer N and outputs the sum of the first N good numbers.
In rising a 200 kg Shivaji Maharaj statue of bronze material 10,000 J of work is performed. How high it is raised ? *
A balloon has a volume of 4.0 L when at sea level (1.0 atm) at room temperature 0f 28 . C What will be its volume when inflated with inflated with the same amount of gas at an elevation where the atmospheric pressure is 700 mm Hg at 28 . C
A gas turbine operating on a simple Joule cycle has a pressure compression ratio of 8:1. The turbine has a thermal efficiency of 60% of the ideal. Determine the actual thermal efficiency.
A Butchery at Western Cape requires a modularized trolley designed for 300 Kg maximum
load bearing capacity.
The information obtained is as follows:
I. The trolley will be shipped to the location using a drone that can lift 20 Kg maximum load
II. The drone has a standard box compartment measuring 1000 mm length, 600 mm width, and
300 mm depth.
(Assume the square meter weight of most
solid flat sheets suitable for the trolley design is 3 Kg/m2
. Furthermore, assume the following
weights for materials that are available off the shelf:
Bearings: 200 g/bearing
Rubberized wheel: 100 g/wheel
Helical springs: 50 g/spring
Cylindrical shaft: 20 g/mm diametral volume for 1000 mm length
Standard trolley handle: 40 g
Sketch stress-strain curve of a ductile materials. Show different points and respective
strength in the curve. Also discuss the curves briefly.
and
How do you find yield strength of a material if distinct yield point is not found in the
material stress strain graph? Explain with necessary sketches.
What is the significance of the study of 'Mechanics of Material'? Explain briefly. And Why knife has ultra thin sharp edge? Explain from the view point Of solid mechanics.
A quantity of gas occupies a volume of 0.4M² a pressure of 100KN/M³ and a temperature of 20°C the gas is compressed isothermally to a pressure of 450KN/M² then expanded adiabatically to its intial volume for this quantity of gas determine;
1:the heat transferred during the compression
2:the change of internal energy during the expansion
3:the mass of gas.
Steam at 1.4MN/M² and of dryness fraction 0.7 is throttled to 0.11MN/M², determine the dryness fraction of the steam after throttling
