Molecular Physics | Thermodynamics Answers

Questions answered by Experts: 3 361

Need a fast expert's response?

Submit order

and get a quick answer at the best price

for any assignment or question with DETAILED EXPLANATIONS!

Search

A 500 m3 living room is to be heated by an electric heater. It is expected that the heater be able to increase the air temperature in the room from 5C to 25C in 1 hour. Assuming no heat losses from the sealed room and an atmospheric pressure of 100kPa, (a) determine the required power in kW of the resistance heater? (b) The total cost of the electrical energy consumed during this 1-hour period. Take the unit cost of electricity to be TL0.80/kWh ?
1kg of a fluid expands reversibly according to a linear law from 5.2bar to 2.4 bar. The initial and final volumes are 0.005m3 and 0.03m3. The fluid is then cooled reversibly at constant pressure, and finally compressed reversibly according to a law pv= constant back to the initial conditions of 5.2bar and 0.005m3. Calculate the work done in each process and the net work of the cycle. Sketch the cycle on a p-v diagram.
Which of the following heat engines has the highest thermal efficiency? The lowest?
i) An engine that in one cycle absorbs 5000 J of heat and rejects 4500 J of heat;
ii) An engine that in one cycle absorbs 25000 J of heat and does 2000 J of work;
iii) An engine that in one cycle does 400 J of work and rejects 2800 J of heat

A room designed to house around 54 individuals at once needs a cooling system. The cooling units available in the market have a capacity of 3 kilowatts. Assume that one individual radiates heat at roughly 350 kilojoules per hour. The room also has twelve 100 W bulbs. The room is to be maintained at 20 degree celsius but at this temperature Some 13500 kJ/h amount of heat also enters through the wall. Find the

a. The net heat transfer rate for the room in kW

b. The number of cooling units required

Hint: Some rounding off might be necessary


The schematic shows a steam power plant in which the turbine develops 1050 kW. The heat supplied to the steam in the boiler is 5040 kJ/kg, the heat rejected by the steam to the cooling water in the condenser is 3780 kJ/kg and the feed pump work required to pump the condensate back into the boiler is 6 kW.

Calculate:

a. the steam flow rate in kg/s.

b. The amount of heat transferred for 10 kg of steam. Follow your book’s sign convention.


one mole of a gas has a volume of 0.0223m^3 at a pressure of 101000pa at 0^c. if the molar capacity at constant pressure is 28.5jmol/k.calculate the molar heat capacity at constant volume.​
Write expression energy levels in paschan back effect.
What is paschan back effect.
Many gas appliances such as ovens and heaters use a small flames to ignite the main burner. To make sure the small flame is burning, a temperature-measuring device is inserted into the flame. What is the most suitable device to use?
at a speed of 60 mph (26.8 m/s). Suddenly, a deer jumps in the road causing Earl to slam on his brakes with a deceleration of -4.91 m/s2. If it takes Earl 2.0 seconds to react to the deer, and the deer is 140 meters from the front of the truck, how close does Earl come to hitting the deer and damaging his new truck?
LATEST TUTORIALS
APPROVED BY CLIENTS