Optics Answers

Paula is probably an object with 21 N force friction is pushing back against the object object with a force of 14 N Draw Freebody diagram and determine what the net forces and in what direction is acting

A progressive wave is given T=0.52π(40t-20x) find

a)amplitude

b)frequency

c)wavespeed

e)wavelenght

Our speakers use 200 mA of current at maximum volume. The voltage is 12V. The current is used to produce a magnet which is used to move the speaker cone. Find the resistance of the electromagnet.

What mass of silver salt is deposited when a current of 2.6 A is passed though a solution of a silver salt for 40 minutes? (ag=108 F=96500C)

In Newton’s rings experiment using light of two wavelengths , it is observed that 10 th order bright ring corresponding to wavelength 1 coincides with 15 th order dark ring corresponding to wavelength λ₂ when viewed by reflected light. Find the ratio of λ1 and λ₂

Amultimodestep-indexfiberhascoreand cladding refractive indices of 1,475 and 1.458 respectively. If it has a core radius of 30 μm and operates at a wavelength of 1250 nm.

– What should be the core radius of the fiber if it is to operate as a single mode fiber

A 14.5 cm high object is placed 50.0 cm in front of a concave mirror with radius of curvature equal to 30.0 cm. determine the distance, height, and image formed by the mirror.

An inductor, a capacitor, and a resistor are all connected in series across an ac source.

If the resistance, inductance, and capacitance are all doubled, by what factor does each of the

following quantities change

A person’s right eye can see objects clearly only if they are between 25 cm and 75 cm away. (a) What power of contact lens is required so that objects far away are sharp? (b) What will be the near point with the lens in place

Define the relative refractive index difference for an optical fiber and show how it

May be related to the numerical aperture. A step index fiber with a large core diameter compared with the wavelength of the transmitted light has an acceptance angle in air of 22° and a relative refractive index difference of 3%. Estimate the numerical aperture and the critical angle at the core–cladding interface for the fiber.