Mechanical Engineering Answers

Questions: 2 625

Answers by our Experts: 2 465

Need a fast expert's response?

Submit order

and get a quick answer at the best price

for any assignment or question with DETAILED EXPLANATIONS!

Search & Filtering

You have been contracted to build a storage space for a company using hollow steel structures as the frame.10 m by 8 m by 5m (height) Design and analyze forces in all the members used


Design a chain drive to run a blower at 600 rpm. the power to the blower is available from a 8kw motor at 1500 rpm. the centre distance is to be kept at 800 mm.
A flat belt drive is to be used to drive a reciprocating compressor running at 720 rpm by a 15 kw 1440 rpm electric motor the required centre distance is 2 m. select the flat belt for the drive from the manufacturer's catalogue
The following data is given for a pair of helical gears made of steel. Normal module = 5 mm, Face
width = 50 mm, Number of pinion teeth = 30, Number of gear teeth = 60, Centre distance = 245 mm,
Normal pressure angle = 20⁰, Pinion speed = 1000 rpm, Permissible bending stress for pinion and gear
material = 150 N/mm2
, Surface hardness = 300 BHN, Factor of safety = 2.0, Service factor = 1.5, Grade
of machining =8. Determine: -
locomotive semi-elliptical laminated spring has an overall length of 1m and
sustains a load of 70kN at its centre. The spring has 3 full length leaves and 15
graduated leaves with a central band of 100 mm width. All the leaves are to be
stressed to 400 MPa, when fully loaded. The ratio of the total spring depth to that
of width is 2. E=210 kN/mm2
. Determine
(i) The thickness and width of the leaves
(ii) The initial gap that should be provided between the full length and
graduated leaves before the band load is applied.
(iii)The load exerted on the band after the spring is assembled.

List four (4) main energy sources


The average annual electricity consumption by a household refrigerator has decreased from 1800 kWh in 1974 to 450 kWh today. Consider a country with 10 million households with a market penetration of 100 percent for modern refrigerators. If the refrigerators in this country were to continue to consume electric power at the 1974 levels, how much of additional installed power would be needed to meet this extra demand? Assume that the load factor (average fraction of installed power load that is actually produced) of the power plants is 0.8 and the power plants operate 90 percent of the time on an annual basis. 


Which undesirable emissions are produced by the combustion of fossil fuels? What adverse effects are produced by these emissions?


a) With the aid of a sketch explain the method of determining the dryness fraction of steam using a separating and throttling calorimeter,

(9 Marks)

b) The following observations were taken with a separating and a throttling

calorimeter arranged in series

Water separated = 2 kg. steam discharged from the throttling calorimeter = 20.5

kg temperature of steam after thretting 110
relationship between specific heat capacities Cp, C, and characteristic gas constant, R.
LATEST TUTORIALS
APPROVED BY CLIENTS