In 5 minutes, a current of 5 amps is established in a wire. How many coulombs and how many electrons pass through each cross section of this wire?
Solve for the magnetic flux through a loop with an area of 8.5 ✕ 10 -4 m2 found perpendicular to a magnetic field with magnitude 0.75 T.
A current-carrying circular plate with A= 32.2 m2 is inclined at 34° with the Earth’s field direction. If the magnitude of the magnetic field is 48 125 nT, solve for the (a) angle between the normal to the surface and the B vector, and the (b) magnetic flux through the antenna
write matlab code to implement differential length, area and volume with values from user?
A charged particle is moving without deflection in a space region where an elec- tric field E = 3.5x102V/m and a magnetic field B = 0.25T act in perpendicular directions.
Calculate the speed of the particle.
An electric field has a surface of 4cm2 and it is in a region of space with a magnetic field B = 2x10−3T orthogonal to it.
Compute the value of the flux of the magnetic field through the circuit.
Magnetic field due to solenoid
Two parallel rails with negligible resistance are 10.0 cm apart and are connected by a 5.00 ohm resistor. The circuit also contains two metal rods having resistances of 10.0 ohm and 15.0 ohm sliding along the rails (Fig. P31.31). The rods are pulled away from the resistor at constant speeds of 4.00 m/s and 2.00 m/s, respectively . A uniform magnetic field of magnitude 0.0100 T is applied perpendicular to the plane of the rails. Determine the current in the 5.00 ohm resistor.
question taken from physics for scientists and engineers, 6th edition. chapter 31, q.31
an electric dipole with dipole moment 4*10-9 is aligned at 30 degree with the direction of a uniform electric field of magnitude 5*104 N/C. calculate the magnitude of the torque acting on the dipole.
An electron is moving along an electric field. If the initial kinetic energy was greater than zero, describe the following parameters: Change in KE, Change in U, Change in V and work.