Engineering Answers

Mechanical Engineering 2219
Electrical Engineering 1543
Civil and Environmental Engineering 1044
Chemical Engineering 846
Other 252
Material Science Engineering 57
3D CAD Modeling 51
Thermal Power Engineering 44

Questions answered by Experts: 6 056

Need a fast expert's response?

Submit order

and get a quick answer at the best price

for any assignment or question with DETAILED EXPLANATIONS!

Search

An air and water vapour mixture at 1bar and 26.7oC has a specific humidity of 0.0085.determine the 

percentage of saturation.


A parallel resonant circuit has a capacitor 100pF in one branch and the impedance of 100 micro Henry plus a a resistance of 10 ohms in another parallel branch, calculate:

(a) resonant frequency 

(b) impendance of the circuit at the resonance and the line current at resonance 

(c) Q-quality factor of the circuitry


4^(×)+4^(×+1)+3=0

Simplify


In 1967 Mercedes-Benz presented their new steep-bank track with a maximum bank
angle of 90 degrees to the horizontal as shown below. At that time they were testing
the “new” SEC450 model that has a track width of 1.5m and its center of gravity
lies midway between the wheels. The center of gravity is 0.75 meters above the
horizontal and the coefficient of friction between the tyres and the road surface is 0.7
under dry conditions.

Determine the following:

a) The maximum speed in km/h at which this car could round an unbanked
bend of 75 meters radius

b) The angle to the horizontal the driver must bank to ensure “no-side slip”
conditions at a speed of 60 km/h

c) If the driver moves up the incline to 15 degrees to the horizontal, determine
the speed at which the car in (a) above would now skid in this bend.

State major entrepreneural competitives


A 7 m diameter spherical ball is known to emit radiation at a rate of 340 W when its surface temperature is 880 K. Determine the average emissivity of the ball at this temperature. 𝜎 = 0.1714 x10-8 W/m2K 4 .


Solar radiation is incident on a flat-plate collector at a rate of 930 W/m2 . The glazing has a transmissivity of 0.82 and the absorptivity of absorber plate is 0.94. Determine the maximum efficiency of this collector.


Solar radiation is incident on a flat-plate collector at a rate of 260 W. The product of the transmissivity of glazing and the absorptivity of absorber plate is τα = 0.85 for this single glazing collector. The heat loss coefficient of the collector is 0.5 W/m2 °C. The collector is at an average temperature of 120 °C and the ambient air temperature is 67 °C. (a) Determine the efficiency of this collector. (b) Determine the efficiency of a double-glazing collector whose τα value is 0.80 and the heat loss coefficient is 0.3 W/m2 °C. Use the same collector and ambient air temperatures


If the distance between the sun and the earth was the half of what it is L = 0.5 × 1.496 ×1011 m, what would the solar constant be? The sun is a nearly spherical body that has a diameter of D = 1.393 ×109 m and the effective surface temperature of the sun is Tsun = 5778 K. 𝜎 = 5.67 x10-8 W/m2K 4 .


What changes would you notice if the sun emitted radiation at an effective temperature of 2000 K instead of 5762 K?


LATEST TUTORIALS
APPROVED BY CLIENTS