Other Engineering Answers

Questions: 881

Answers by our Experts: 418

Need a fast expert's response?

Submit order

and get a quick answer at the best price

for any assignment or question with DETAILED EXPLANATIONS!

Search & Filtering

In a single slit Fraunhofer diffraction experiment, a light source of wavelength 600 nm is used. Calculate the angular spread of the central maxima and angular positions of second and third minima if the widths of the slit are following:
1 mm
2.2 µm
A diffraction grating with β lines/cm is illuminated by a light of wavelength λ. Prove that the dispersive power of the grating in order spectrum is.
can u assist me to do this Bunyan Lumber Company needs to create a table of the engineering properties of its lumber. The dimensions of the wood are given as the base and the height in inches. Engineers need to know the following information about lumber assignment?
How to develop a program to Calculate the maturity amount after a period of deposit. The bank pays 4% interest per year for any deposits made. using c#.
A vector a of magnitude 8 units has two components. One is perpendicular to a of magnitude 6 units. What is the magnitude of the other component?
A temperature sensor produces an output of 100mV at 20°C and 200mV at 40°C. You are required to design a circuit using an opamp so that the output voltage at 20°C will now be 2V.
What type of opamp configuration would be required for the above?
The figure shows the cross section of a hydraulic ram filled with oil (incompressible fluid) in the working chamber of Cylinder 2 (which is on the right hand side of the piston in the figure) whereby the fluid is acting on the the piston face on an effective area A2.
A supply of pressure is connected to the working chamber of Cylinder 2, delivering a pressure P2 of 4 bar.
The diameter of Cylinder 2 is given as 150 mm.
The diameter of the piston push rod is given as 30 mm.
Q: Calculate the x component value of the vector force F2 produced onto the piston by pressure P2 in the cylinder, according to the coordinate system shown in the figure.
Give your answer in Newtons.
Why stability is important in DSP?
what is the difference between logical and physical medium in DSP?
Write a program that can enter marks for 1 student and calculate his total and
grade with the following format
The inputs:
ID (As Integer), First (As Double), Second (As Double), Final (As Double), Total (As
Double) and Grad (As Char)
The Grades are: A for 90’s, B for 80’s, C for 70’s, D for 60’s and F for less than 60.
The output:
St_Nm ID First Second Final Average Grade
LATEST TUTORIALS
New on Blog
APPROVED BY CLIENTS