Question #285558
n a slab milling operation the diameter of cutter is 50 mm and number of teeth of cutter is 12. If the
cutter spindle speed is 300 rpm, depth of cut is 2 mm, length of job is 500 mm and table longitudinal
feed is 200 m/min what will be the feed per tooth during the milling operation? If the cutter over travel
is 2 mm what is the machining time for the single pass milling operation?
Expert's answer
Answer:
(a) The feed per tooth during the milling operation is 55.5555 mm/tooth.
(b) The machining time for the single pass milling operation is 0.15354 seconds.
Explanation:
The stepwise procedure to solve this problem is shown in the following attached image:
Learn more about our help with Assignments: Mechanical Engineering
Comments