Answer to Question #273246 in Programming & Computer Science for Karabo

Question

A corporation is planning to implement EtherChannel and a new VLAN design in order to 

make the network more efficient. You have been asked to work on a design and prototype of

the new network. You have created the logical topology and now need to configure the 

devices in order to evaluate the design. You will configure VLANs and access port VLAN 

membership on access layer switches. You will also configure EtherChannel and trunking. 

Finally, you will configure a router and a Layer 3 switch to route between VLANs. Some 

addressing had already been configured.

Instructions

Part 1: Basic Router Configuration

Step 1: Configure router Edge-Router with required settings.

(a). Copy and paste the following configuration into the Edge-Router router CLI.

ip route 192.168.10.0 255.255.255.0 GigabitEthernet0/0/0

ip route 192.168.20.0 255.255.255.0 GigabitEthernet0/0/0

ip route 192.168.30.0 255.255.255.0 GigabitEthernet0/0/0

ip route 192.168.99.0 255.255.255.240 GigabitEthernet0/0/0

Answer 1

Dear Karabo, your question requires a lot of work, which neither of our experts is ready to perform for free. We advise you to convert it to a fully qualified order and we will try to help you. Please click the link below to proceed: Submit order