Answer to Question #299811 in Computer Networks for Zaheer

Question

**************first 5 are solved************

1) Configure Host Names

2) Shutdown unused interfaces

3) Configure enable password and vty passwords of cisco

4) Use VTP mode transparent and domain ccna

5) Add VLANS 10,20,30,100 to the VLAN database

(1) Configure Etherchannel on the core switches

(2) Core switches should support layer 3 interVLAN routing:

VLAN 1 = Core 1 = 10.1.1.251/24, Core 2 = 10.1.1.252/24

VLAN 10 = Core 1 = 10.1.10.251/24, Core 2 = 10.1.10.252/24

VLAN 20 = Core 1 = 10.1.20.251/24, Core 2 = 10.1.20.252/24

VLAN 30 = Core 1 = 10.1.30.251/24, Core 2 = 10.1.30.252/24

VLAN 100 = Core 1 = 10.1.100.251/24, Core 2 = 10.1.100.252/24

(3) Access layer switches will only have management IP addresses in VLAN 1:

Switch 1 = 10.1.1.1/24

Switch 2 = 10.1.1.2/24

Switch 3 = 10.1.1.3/24

Answer 1

It's been a while since this question is posted here. Still, the answer hasn't been got. Consider converting this question to a fully qualified assignment, and we will try to assist. Please click the link below to proceed: Submit order