Answer to Question #298600 in Computer Networks for Max

Question

1) Use COP and LLOP to verify inks.

2) Verify which ports are forwarding and blocking (spanning tree)

3) Optimize spanning tree with Core1 being root for odd VLANs and Core2 the root for even VLANs.

4) Configure Etherchannel on the core switches.

5) Core switches should support layer 3 interVLAN routing:

VLAN 1 = Core 1 = 10.1.1.251/24, Core 2 = 10.1.1.282/24

VLAN 10 © Core 1 = 10.1.10.251/24, Core 2 © 10.1.10,.252/24

VLAN 20 = Core 1 = 10,1.20.251/24, Core 2 = 10.1.20.252/24

VLAN 30 = Core 1 = 10.1.30.251/24, Core 2 = 10.1.30.252/24

VLAN 100 = Core 1 = 10.1.100.251/24, Core 2 = 10.1.100.252/24

6) Access layer switches will only have management P addresses in VLAN 1:

3) Switch 1 = 10.1.1.1/24

Switeh 2 = 10.1.1.2/24

Switch 3 = 10.1.1.3/24

Answer 1

It's been a while since this question is posted here. Still, the answer hasn't been got. Consider converting this question to a fully qualified assignment, and we will try to assist. Please click the link below to proceed: Submit order