Search & Filtering
How the following products are manufactured.
1. Seemless Tubes
2. Steam Turbines
3. Glass Sheets
Using appropriate diagrams, determine the possible conflict points on a four-leg signalized intersection for a two-phase system. Assume no turn on red.
what principles are preffered to bring data into cache so that low amount of miss ratio is observed
A four-stroke petrol engine has the following data:
Number of cylinders=4
Fuel used = 19.2 kg/hour
Fuel to air ratio = 1:16 by weight
Suction pressure = 1bar
Suction temperature = 30oC
Stroke to bore ratio = 1.25
Engine speed = 2400rpm
Volumetric Efficiency = 78%
Find the stroke length of engine[m]. Write the answer with 3 decimal places and do not add the unit.
A 4-cylinder four stroke petrol engine develops 18.5 kW at 1500 r.p.m. The mean effective pressure is 5.5 bar. Calculate the stroke (in mm) the engine cylinder, if the length of stroke is 1.5 times the bore. [Write the answer with two decimal places but do not write the unit]
What is possible bus construction strategy when you wish to connect data,address and control buses for I/O system and memory? Elaborate one of the mappings with diagram.
A data block is brought to cache memory on request by CPU, what different methods of keeping the data and associated address information can be used in this scenario.
What memory would you use for storage in case you are not concerned with speed.Explain what you understand by access time,seek time and total time taken.
What is the method for sending data towards destination that is not following the same clock cycle?
Give rules for this communication.
A steam pipe 100mm external diameter is to be lagged with two layers of different lagging material each 25mm each material A has a coefficient of thermal conductivity of 0.052W/mk while that of material B is 0.086W/mk Determine which of the two lagging materials must be on the inside to produce the best insulation arrangement if the internal surface temperature is 320°c and the external surface temperature is 20°c Determine the heat loss/h a 10m run of lagged pipe with the best lagging arrangement
