Search & Filtering
Consider the Boolean function 𝐹(𝐴, 𝐵, 𝐶,𝐷, 𝐸) = ∑𝑚(1,2,3,4,8,9,11,13,14,16,17,18,20,21,26,29,31) and implement the function using one 16×1 multiplexer.
It takes 50J of energy to move 10C of charge from point A to point B. What is the potential difference between points A and B
A capacitor, c=150mf, is connected to a source of alternating e.m.f of r.m.s value 300v and frequency 60hz. a, calculate the r.m.s value of the current. b, if this capacitor is replaced by an inductor of 60mh, calculate the r.m.s value of the resulting current
If a resistor is to carry 2 A of current and handle 100 W of power , how many ohms must it be ..? Assume that the voltage can be adjusted to any required value.
How much average current can be drawn from an 80 Ah battery for 12 h...?
Explain how current , voltage and resistance is measured using digital multimeter.construct a circuit in simulator and determine the values of current ,voltage,and resistance using DMM.
A 6.8 KΩ resistor has burned out in a circuit.you must replace it with another resistor with the same resistance value.if the resistor carries 10 mA what should its power rating be..?assume that you have available resistors in all the standard power ratings.
If a battery can provide an average of 1.5 A current for 24 hours.what is its ampere hour rating
Draw a simple stop/start circuit incorporating a remote stop/start station
A battery of 12.0V powers a circuit in which two resistance R1 = 150Ω e R2 = 300Ω are linked in parallel. Compute the current intensity circulating in the circuit.
