Answer to Question #264478 in Electrical Engineering for jalil Ahmed

Question

This task requires you to suggest a suitable process or equipment to assist in moving the following load correctly and safely: 

1. 12 - DC Power supply unit 
2. Sheet steel 
3. Pallets 
4. Kegs 
5. Oxygen Cylinder bottle 
6. Rolled steel 

Answer 1

12 - DC Power supply unit 

Railway power supplies are designed to meet rail-specific standards including EN50155, EN45545, EN50163, EN50124, EN50125, EN61000, EN50121-3-2 EMI, EN55022 Class B, RIA12, IEC571, as well as IEC61373 shock/vibration and RIA13 and RIA20 mechanical standards.

Sheet steel 

90% of the world's cargo is transported by steel ships. The global container fleet consisted of an estimated 17 million containers of various sorts, the bulk of which were built of steel.

Pallets 

Tips for Preventing Shipping Damage

Packing peanuts or bubble wrap can be used to fill empty space within boxes.

To save space, arrange boxes and cartons by size.

Make certain that there is no air space between the boxes.

Cardboard should be used to protect the exterior corners and edges.

Wrap and band the weight as tightly as you possibly can.

Kegs 

In relation to the above, rolling the keg from place to place or dropping it mid-transport are two of the worst things you can do to preserve beer quality. Many kegs have handles that make transporting them simpler; if yours doesn't, use a dolly or gently carry the keg with the assistance of a companion.

Oxygen Cylinder bottle 

To transfer an oxygen cylinder, place it firmly on the rear seat floor. To prevent oxygen and heat from accumulating inside the automobile, keep a window open at least an inch or two. Never transport oxygen in a vehicle trunk or truck bed.

Rolled steel 

Depending on the length and thickness of the plating, each coil typically weighs between 7 and 15 tons. Coils weighing up to 30 tons are not unheard of.