Answer to Question #191290 in Electrical Engineering for mika shima

Question #191290

Procedure

1. Using the LTspice XVII do the schematic below and set the V = 10v and R = 1k. In Edit simulation command go to transient then set the Stop time to 5s. Measure the voltage in Vout and the Current of the circuit then take a screenshot of each results.

2. Using the Ohm`s Law and the values of step 1, calculate and record the current value. I = ________________mA

3. Using the LTSpice XVII do the schematic below and measure the current value after the Resistor, take a screenshot of the result.

 I = ________mA


4. Using the Ohm`s Law and the values of step 3, calculate and record the current value. I = ________________mA

5. Raise the value of Voltage to obtain a reading of 15mA.

V = ___________volts


1
Expert's answer
2021-05-31T06:20:14-0400

2. Using Ohm`s Law and the values of step 1, calculate and record the current value. I = _0.01__mA

3. Using the LTSpice XVII do the schematic below and measure the current value after the Resistor, take a screenshot of the result.

 I = ____5.15____mA


4. Using Ohm`s Law and the values of step 3, calculate and record the current value. I = _______0.006_________mA

5. Raise the value of Voltage to obtain a reading of 15mA.

V = _____1.05______volts



Need a fast expert's response?

Submit order

and get a quick answer at the best price

for any assignment or question with DETAILED EXPLANATIONS!

Comments

No comments. Be the first!

Leave a comment

LATEST TUTORIALS
New on Blog
APPROVED BY CLIENTS